Boot Menu Selections - IBM xSeries 240 81Y Hardware Maintenance Manual

Important
For security purposes, change the user name
and password using the System Management
processor.
If you update the System Management processor
microcode, the default user name (USERID) and
password (PASSW0RD) are reset. If you had
previously changed them, you will need to
change them again.
When you have logged into the System Management
processor, the following main menu opens:
2 Monitors
3 Error Logs
4 Service Processor Configuration
5 System Services
6 System Power
7 Boot
B Remote Terminal Status
Y Disconnect Current Logon
Z Start Remote Video
3. Select 6 System Power.
The following System Power menu opens:
1 Current Power Status
2 Power Configuration
3 Power On
4 Power Off
4. Select a System Power menu item.
Select 1 Current power Status for information
about the current server power status.
Select 2 Power Configuration for information
about the server power configuration.
Select 3 Power On to turn the server on (if it is
currently off).
Select 4 Power Off to turn the server off (if it is
currently on).

Boot Menu Selections:

selections available from the Boot menu to:
Shut down the server operating system and then
restart the server
Restart the server immediately, without first
performing an operating system shutdown
Restart the System Management processor
To access these functions:
1. Use a terminal program to establish a connection with
the System Management processor modem.
2. Log in to the System Management processor.
When you have established a connection with the
System Management processor, you will be prompted
for a user name and password. You must provide a
72
xSeries 240 HMM
You can use the