Configuring Copy Settings To Your Needs - Canon imageRUNNER 2206 User Manual

Configuring Copy Settings to Your Needs

The default settings are the settings that are displayed whenever you turn ON the machine, or when you press
you register your frequently used settings as default settings, you can eliminate the need to configure the same
settings every time you make copies. In addition, you can also register combinations of multiple copy settings and use
them whenever you need them.
NOTE
The machine comes pre-configured with factory default settings (
change and register the default settings according to your needs.
Copying
Setting Menu List(P. 95) ). You can
Change the copy ratio to 95% and register it as the
default setting. From now on, you can make copies
without changing the copy ratio.
Settings(P. 62)
Go to <Favorite Settings> and register the combination of
<Number of Copies> and <Finishing Type> turned
<Collate>. You can then easily use this setting
combination whenever you need it.
Frequently Used Copy Settings(P. 63)
61
3EEJ-018
. If
Changing Default
Registering