Cleaning; Jams; Fuse Replacement - Pitney Bowes W985 User Manual

Stacker with dryer for use with addressright printers and w360 tabber
Hide thumbs Also See for W985:
Table of Contents

Advertisement

Height is adjusted by squeezing the release lever under handle top, lifting the Dryer unit to the new
position, and then releasing the handle in the new slot position.

Cleaning

The Dryer requires a clean environment, free from dust, airborne contaminants and moisture.
Operator maintenance is limited to keeping the vents open and avoiding dust, paper fragments, and
material from touching the quartz heater bulb inside.

Jams

To clear jams under the Dryer, use the height adjustment handle and move it to the highest position to
make the material accessible. After clearing jam, move handle back to original position.
If mail pieces jam in the Stacker, the circuit breaker switch will automatically shut the Stacker and
Dryer off. DO NOT press the power switch on the Stacker or Dryer. With the Stacker off, clear the jam
and any remaining mail pieces. Wait 1 to 2 minutes before pressing the circuit breaker switch on the
Stacker. The Stacker and Dryer will power back up automatically when you press the circuit breaker
switch.

Fuse Replacement

Caution: Disconnect power before replacing fuses. Turn the power switch Off
and unplug the power cord from the AC power receptacle. For continued
protection against risk of fire, replace only with same type and rating of fuse.
Follow these steps to replace the fuse in the Dryer:
Pitney Bowes
User Guide
September 2021
Optional W863/W864 Ink Dryer
40

Advertisement

Table of Contents
loading

This manual is also suitable for:

W986W863W864W85fW86f

Table of Contents