2. Connect communications interface cable at Printer Interface port on Stacker and the other end
to the Conveyor port on the Tabber.
1. Conveyor Port on Tabber (circled)
2. Power Switch
3. AC Inlet for Power Cord
3. Connect AC power cord at the Tabber (see photo at left for AC inlet) and turn on power to the
Tabber. Refer to the Tabber Quick Start Guide (SV62479A) for information on running the
Tabber.
Pitney Bowes
User Guide
September 2021
Attachment of Stacker to a W360 Tabber
54