Pitney Bowes W985 User Manual page 13

1. Input Media Stop - This plate is adjusted so that mail pieces from the printer hit this stop and
drop flat onto the conveyor belt. The height adjustment handles materials of varying
thicknesses.
2. Hold Down Assembly - These springs and rollers are adjusted to keep the mail pieces in
contact with the conveyor belts.
3. Material Ramp Media Stop - This stop is adjusted to retain media at the end of the Stacker.
4. Material Ramp - The angle of this ramp can be adjusted to accommodate various widths of
material when stacking.
5. "Stack Full" Sensor - This sensor is adjusted so that the mail pieces stack in an orderly
sequence for retaining presort order and it stops the printer when the Stacker is full.
Pitney Bowes User Guide September 2021
Stacker Controls and Indicators
13