Stacker Adjustments
Theory
The angle of the material ramp is dependent on the width and thickness of the mail piece. The general
rule is that the shorter and thinner the mail piece–the steeper the ramp angle; while the longer and
thicker the mail piece–the flatter the ramp angle.
The position of the media stop on the material ramp is dependent on the width of the mail piece. The
media stop is set closer to the printer for shorter mail pieces and farther away for longer mail pieces.
The wider the mail piece, the farther up the ramp the media stop needs to be set.
Pitney Bowes
User Guide
September 2021
30