Operation - Pitney Bowes W985 User Manual

Operation

The Dryer contains only one operator control, a power on/off switch with an associated indicator. This
switch is used to turn power to the Dryer on or off. The switch will light when on.
Since the Dryer receives its power from a dedicated power outlet on the associated Stacker, this
switch will light (if set at on) only when the power switch on the Stacker is switched on.
Therefore, when the power switch on the Dryer is left in the ON position, the Dryer will activate only
when the conveyor belts start to move. This effectively causes the Dryer to operate only when needed
(when mail pieces are conveyed under it to be dried). When the conveyor stops, the Dryer will
automatically switch off.
Warning! Dryer will ignite combustible materials. Keep all items clear of this
machine, except envelopes specified for use with this machine.
The Dryer/Stacker combination draws a substantial amount of power. Note the
wattages of other appliances you plug into the same outlet or branch circuit and
compare that with the rating of the outlet or branch circuit to avoid overloading your electrical
system.
Caution:Be sure to observe all labeled warnings and precautions on Dryer:
Do not operate unattended.
Surfaces are Hot - Avoid Contact
Turn Power Off When Not In Use. Only Operate With Conveyor Moving.
Keep air intake vents free at all times.
Disconnect power before changing fuse. For continued protection against risk of fire, replace only
with same type and rating of fuse.
Pitney Bowes User Guide September 2021
Optional W85F, W86F Ink Dryer
46