Pitney Bowes W985 User Manual page 63

Adjustment Charts and Tables
1. Measure the length and thickness of your material in inches.
2. Go to the length at the bottom of the chart and then up that line to the thickness. The thickness
must be approximated in the gray area which represents 3/8" (9.5mm) between the min.
thickness and max thickness.
3. Follow a straight line to the left side of the chart. That is the distance in inches for that setting.
For example: If the material is 11 inches (279mm) long and 1/8 inch (3.2mm), the reading on the top
chart would be approximately 2.5 inches (64mm) and on the bottom chart approximately 1.75 inches
(44mm).
Pitney Bowes User Guide September 2021 63