Pitney Bowes W985 User Manual page 29

Stacker Adjustments
1. Material Ramp
2. Ramp Angle Adjustment Knob
3. Ramp Angle Position Scale
To adjust the media stop position:
Loosen the knob under the material ramp. Slide the media stop to the desired value up or down
l
on the ramp. Tighten the knob when you are finished.
Refer to the Appendix to help you determine the media stop position if necessary.
1. Material Ramp
2. Media Stop
3. Media Stop Position Scale
4. Adjustment Knob for Media Stop
Pitney Bowes User Guide September 2021 29