3. Circuit Breaker - If pieces jam in the Stacker, the circuit breaker causes the Stacker to power
off automatically. After the jam is cleared, you must press the circuit breaker switch to reset the
Stacker before you can resume operation.
4. Fuses - Two 1.6 Amp Slo Blow 250 VAC fuses.
5. Dryer Outlet - This is a convenience outlet to be used with the optional Ink Dryer.
6. Power Inlet - This is where the input power cord is connected for the Stacker.
Warning! The Dryer with Stacker combination draws a substantial amount of
power. Note the wattages of other appliances you plug into the same outlet or
branch circuit and compare that with the rating of the outlet or branch circuit to
avoid overloading your electrical system.
Pitney Bowes
User Guide
September 2021
Stacker Controls and Indicators
15