ADTRAN TOTAL ACCESS 600R User Interface Manual page 30

Total Access 600R User Interface Guide (UIG)
To support these transfers, ADTRAN delivers a TFTP program with the Total Access 600R called TFTP Server. You
can configure any PC running Microsoft Windows with this software, and store a configuration file.
Before using the TFTP method for
address, subnet mask, and default gateway (if required).
Only one configuration transfer session (upload or download) can be active at a time.
Displays the method used to transfer the configuration file to or from a server.
S U >C
YSTEM TILITY ONFIG
Only transfers are currently supported from this menu.
B
INARY
S U >C
YSTEM TILITY ONFIG
Specifies the IP address of the TFTP server. Get this number from your system administrator. If using the ADTRAN
Utilities TFTP server, this number appears in the TFTP server status window. The factory default value is
S U >C
YSTEM TILITY ONFIG
Defines the name of the configuration file that you transfer to or retrieve from the TFTP server. The default name is
, but you can edit this name.
ta600.cfg
S U >C
YSTEM TILITY ONFIG
Indicates the current status of the update.
S U >C
YSTEM TILITY ONFIG
Indicates the status of the previous update.
S U >C
YSTEM TILITY ONFIG
Retrieves the configuration file specified in the
enter to begin or enter
Y N
If you execute this command, the Total Access 600R retrieves the configuration file, reboots, then
restarts using the new configuration.
S U >C
YSTEM TILITY ONFIG
Saves the configuration file specified in
To start this command, enter
Before using this command, you must have identified a valid TFTP server in
Page 30
C
ONFIG
T >T
RANSFER RANSFER
T >TFTP S
RANSFER
T >TFTP S
RANSFER
T >C
RANSFER URRENT
T >P
RANSFER REVIOUS
T >L
RANSFER OAD AND
TFTP S
to cancel.
T >S
RANSFER AVE
TFTP S
ERVER
to begin or enter to cancel.
Y N
© 2002, ADTRAN, Inc.
, the Total Access 600R should have a valid IP
T
RANSFER
XMODEM
T
YPE
IP A
ERVER DDRESS
F
ERVER ILENAME
T S
RANSFER TATUS
T S
RANSFER TATUS
U C
SE ONFIG
field from the server. To start this command,
F
ERVER ILENAME
C R
ONFIG EMOTELY
to the server identified in
F
ILENAME
and are supported.
TFTP
0.0.0.0.
TFTP S IP A
ERVER DDRESS
TFTP S IP A
ERVER DDRESS
64200600L1#T-31A
.
.