ADTRAN TOTAL ACCESS 600R User Interface Manual page 51

NAT V
64200600L1#T-31A
P
RIVATE
A
DDRESS
M
ODE
P
RIVATE
A
DDRESS
P
RIVATE
P M
ORT ODE
P
RIVATE
P
ORT
T
RANSLATE
B
ODY
Shows the protocols that are actively being translated.
IEW
P A This option is only available when
RIV DDR
abled. This shows the private address of the host that the entry is
used for.
P A This option is only available when
UB DDR
abled. This shows the public address this entry is using for its
NAPT.
S A This option is only available when
ERV DDR
abled. This is the destination of the packet.
P This option is only available when
ROTO
abled. This shows the protocol used (
This option is only available when
P P
RIV ORT
abled. This is the private port used for the entry.
This option is only available when
S P
POOF ORT
abled. If the same private port is already used in the table, it will
spoof a different port for the entry.
© 2002, ADTRAN, Inc.
Total Access 600R User Interface Guide (UIG)
This option is only available when
is enabled. The private IP address can be specified
TION
to steer certain protocols and ports to specific servers in
the private network. Likewise, internal hosts can be
steered to certain servers on the public network. A new
request from the public network matching this entry's
public parameters will be dropped if this mode is set to
. Choices are S
A I
NY NTERNAL
. Default is A
I
NTERNAL NY
This option is only available when
is enabled and
P
TION RIVATE
. Default is 0.0.0.0.
S
PECIFIED
This option is only available when
is enabled. However, it will not be available if
TION
is set to ICMP; A
P M
ROTOCOL ODE
; or N
ICMP); A ; S
LL PECIFIED
The private destination port associated with this entry
can be specified to add more control over certain types
of traffic. Leave as A
P
NY
Choices are A and S
P
NY ORT
.
P
ORT
This option is only available when
is enabled and
P
TION RIVATE
. However, it will not be available if
IFIED
is set to ICMP; A
M
ODE
NY
; or
N
A ; S
ONE
LL PECIFIED
This option is only available when
is enabled. When set to
TION
load in the packet is scanned for occurrences of the
private/public IP address in binary or ASCII form. Set
this to (default) for applications where this will
No
cause problems.
NAT P T
ORT RANSLA
and A
PECIFIED NY
I .
NTERNAL
NAT P T
ORT RANSLA
is set to
A M
DDRESS ODE
NAT P T
ORT RANSLA
(TCP, UDP,
NY
.
ONE
to cover all port types.
ORT
. Default is A
PECIFIED
NAT P T
ORT RANSLA
is set to S
P M
ORT ODE
PEC
P
ROTOCOL
(TCP, UDP, ICMP);
OR
. Default is 0 (decimal).
NAT P T
ORT RANSLA
, the application pay-
Y
ES
is en-
NAT P T
ORT RANSLATION
is en-
NAT P T
ORT RANSLATION
is en-
NAT P T
ORT RANSLATION
is en-
NAT P T
ORT RANSLATION
, etc.).
TCP, UDP, ICMP
is en-
NAT P T
ORT RANSLATION
is en-
NAT P T
ORT RANSLATION
-
-
-
OR
NY
-
-
-
Page 51