ADTRAN TOTAL ACCESS 600R User Interface Manual page 69

WAN IP Setup
For WAN IP setup, choose either PPP IP Setup or Frame Relay IP Setup. Both of these procedures are described on
the pages that follow.
Step
1
2
3
4
5
6
7
8
9
64200600L1#T-31A
WAN IP Setup - PPP IP Setup Instructions
From the Main Menu, select R
WAN.
Set the L2 P to PPP.
ROTOCOL
Press Enter on the PPP P
Press Enter on the A
UTHENTICATION
options related to how the link is established. Default is T
PAP, CHAP, EAP.
OR
Press the left arrow key to return to the WAN/PPP P
then press Enter on the IP [+] option. Verify that M
Arrow down to R [+] to enter WAN IP information.
OUTE
Enter WAN information:
• Far-End IP Address
• Subnet Mask
• Local IP
The other config items can be left at the defaults.
Use the <Esc> key to return to the top level Total Access 600R menu.
Confirm any necessary changes.
For NAT configuration, please see IP Routing with NAT.
© 2002, ADTRAN, Inc.
Total Access 600R User Interface Guide (UIG)
Action
, select C , and then select
OUTER ONFIG
[+] option.
ROFILE
[+] option if you wish to change
ODE
The far-end WAN IP address from the
Total Access 600R.
The subnet mask for this WAN link
The local WAN IP address for the Total
Access 600R.
M =
X ETHOD
menu, and
ROFILE
is O
N
Page 69