Configuration Keystrokes; Getting Help - ADTRAN TOTAL ACCESS 600R User Interface Manual

Configuration Keystrokes

To do this...
Restore factory default settings.
This setting restores the factory defaults based on the location of the cursor. If the cursor is
on a module line (in the M
tory defaults.
Copy selected items to the clipboard.
The amount of information you can copy depends on the cursor location when you press
<C>:
If the cursor is over an editable field, only that item is copied.
If the cursor is over the index number of a list, then all of the items in the row of the list are
copied. For example, if the cursor is over the DS0 field in the M
formation associated with the DS0 is copied.
Paste the item stored in the clipboard, if the information is compatible.
You must confirm all pastes - except those to a single editable field.
Increment the value of certain types of fields by one when you paste information into those
fields.
Decrement the value of certain types of fields by one when you paste information into those
fields.
Insert a new list item.
For example, add a new item to the T
the cursor is over the index number.
Delete a list item.
For example, delete an item from the T
while the index number is active.

Getting Help

The bottom line of the terminal menu window contains context-sensitive help information. When the cursor is posi-
tioned over a set of configuration items, a help message displays (when available) providing a description of the item.
When more detailed help is available for a particular item, ^A displays at the bottom of the window. At this point, if
you press <CTRL+A>, a pop-up help screen displays with information about the item.
Press <CTRL+Z> to activate a help screen that displays the available keystrokes you can use to navigate the terminal
menu.
Press <ESC> to cancel these pop up windows.
64200600L1#T-31A
menu), then only the selected module is updated to fac-
ODULES
U L
ELNET SER IST
U
ELNET SER
© 2002, ADTRAN, Inc.
Total Access 600R User Interface Guide (UIG)
1 screen, all of the in-
AP
connection list by pressing <I> while
L connection list by pressing <D>
IST
Press this key...
F
C
P
>
<
I
D
Page 19