System Config; System Config>Operating Mode; System Config>T1 Timing Mode; System Config>Telnet Access - ADTRAN TOTAL ACCESS 600R User Interface Manual

S C
YSTEM ONFIG
Set up the Total Access 600R operational configuration from the S
included in this menu.
S C >O
YSTEM ONFIG PERATING
For the T1 TDM application, the mode will be displayed as Channel Bank.
S C >T1 T
YSTEM ONFIG
The choices are
T1 T M
IMING ODE
T1 line. Select if there is no timing on the T1 circuit and the 600R will have to provide the clock. Default is
I
NTERNAL
N
ETWORK .
S C >T
YSTEM ONFIG ELNET
Sets Telnet access to or
O
N
S C >T
YSTEM ONFIG ELNET
S C >T
YSTEM ONFIG ELNET
Up to four users can be configured for access to the 600R. Each user can be assigned a security level and time out.
The name is a text string of the user name for this session. You can enter up to 15 characters in this field. The factory
default is no entry in the
N
64200600L1#T-31A

Figure 4. System Config Menu

M
ODE
M
IMING ODE
and
N I
ETWORK NTERNAL
A
CCESS
. The factory default value for this parameter is
O
FF
U L
SER IST
U L >N
SER IST AME
field
AME .
© 2002, ADTRAN, Inc.
Total Access 600R User Interface Guide (UIG)
C
YSTEM ONFIG
Select if the TELCO is providing clocking on the
N
. ETWORK
O
N
menu. Figure 4 shows the items
.
Page 23