Menu Parameters - QuadTech Sentry Plus Series Instruction Manual

2.15

MENU Parameters

With the Sentry Plus Series instrument in STAND BY status, press [F3] = MENU to access
programmable instrument parameters.
Option, Calibration, Key Lock, Change Password, Error Log and About functions. Table 2-5
lists these functions with description and default values.
MENU # Parameter
1 MEMORY
2 SYSTEM
3 OPTION
4 CALIBRATION
5 KEY LOCK
6 CHANGE PASSWORD
7 ERROR LOG
8 ABOUT
M01
0.1A
1.2Ω
STAND BY
0.5s
STAND BY
1 MEMORY
2 SYSTEM
MENU 3 OPTION
4 CALIBRATION
5 KEY LOCK
STAND BY
6 CHANGE PASSWORD
7 ERROR LOG
MENU 8 ABOUT
1 MEMORY
2 SYSTEM
STAND BY
Page 56 of 85
The MENU display contains the Memory, System,
Table 2-5: MENU Parameters
STEP 1/5 GC
RMT LOCK
RMT LOCK
RMT LOCK
Figure 2-6: Menu Display
Function
Store, Recall or Delete a test setup from
instrument memory
Change display contrast
Change beeper volume
Enable EN 50191 Current limit
Enable DC 50V AGC
Multi-Link function, currently unavailable
Enter instrument calibration routine
Qualified service personnel only.
Lock out front panel program access.
Change key lock (user) password.
View status of error queue.
Instrument Information
Manufacturer, software version, etc
LOW : OFF
PROGRAM
PRESET
MENU
MORE..
OFST ERR
LAST
DOWN
SELECT
EXIT
OFST ERR
LAST
DOWN
SELECT
EXIT
OFST ERR
F1
F2
Press F3 = "MENU"
F3
To set/change preset parameters
F4
F1
Press F2 = "DOWN" 5 times to
F2
view complete menu choices
F3
F4
F1
F2
F3
F4
Operation