QuadTech Sentry Plus Series Instruction Manual page 46

To label the selected location, press [F1] = UP (and/or [F2] = DOWN) to enter a combination
alpha-numeric name for this test setup. Press [F3] = NEXT C. after each digit to accept that digit
and move on to the next. The name can be up to 10 characters long. When finished entering the
name, press [F3] = ENTER two times.
1 (0 STEPS)
2 (0 STEPS)
LABEL 3 (0 STEPS)
Test Setup 4 (0 STEPS)
5 (0 STEPS)
SELECT FUNC.
1 (0 STEPS)
2 (0 STEPS)
Exit
3 (0 STEPS)
Label
4 (0 STEPS)
Function
5 (0 STEPS)
SEL. MEMORY
The display will prompt: STORE TO #? Press [F1] = YES to accept storage to that memory
location # or [F2] = NO to reject storage. Press [F4] = RETURN once to return to "MENU"
display. Press [F4] a second time to return to "STAND BY" display.
1 (0 STEPS) 123
2 (0 STEPS)
Confirm 3 (0 STEPS)
STORE 4 (0 STEPS) STORE TO 1?
5 (0 STEPS)
1 (5 STEPS) 123
2 (0 STEPS)
3 (0 STEPS)
MEMORY
4 (0 STEPS)
5 (0 STEPS)
SELECT FUNC.
M01
0.1A
STAND BY
1.2 Ω
Display with
Memory ID
0.5s
STAND BY
The MEMORY RECALL and DELETE functions work the same way as STORE. When the
instrument returns to STAND BY status there will be a tag "Mxx" in the upper left hand corner
of the display to indicate which memory location is in use (displayed).
Page 46 of 85
_
RMT LOCK
123
RMT LOCK
RMT LOCK
RMT LOCK
1/5 GC
RMT LOCK
UP
DOWN
NEXT C.
CANCEL
OFST ERR
UP
DOWN
NEXT C.
CANCEL
OFST ERR
YES
NO
OFST ERR
STORE
RECALL
DELETE
RETURN
OFST ERR
LOW : 0.3Ω
PROGRAM
PRESET
MENU
MORE..
OFST ERR
F1 To enter an alpha-numeric character
F2 To enter an alpha-numeric character
Accept entered character and move
F3
on to next character
F4
F1
F2
Press 2 Times to exit LABEL
F3
function
F4
F1 Store test setup to location #1
F2
F3
F4
F1
F2
F3
F4 Return to MENU display.
F1
F2
F3
F4
Operation