Error Codes, Messages, and Solutions
This table lists the messages that appear in the LASER CLASS 2060P LCD
display and the corresponding error codes that appear in activity reports,
and tells what to do for each.
Message
AUTO REDIAL
BUSY/NO SIGNAL
13-40
Frequently Asked Questions
Error Code
—
#018
Cause
The receiving fax
machine was busy
and the LASER
CLASS 2060P is
waiting to redial.
The telephone
number you dialed
is busy.
The other party's
fax machine is not
working properly.
The other party is
not using a G3 fax
machine.
The telephone line
type setting on your
LASER CLASS
2060P is incorrect.
The receiving fax
machine did not
answer within 55
seconds.
Action
—
Try sending the
document again
later.
Contact the other
party and have them
check their fax
machine.
Contact the other
party and have them
send or receive the
document using a
G3 machine.
Set your LASER
CLASS 2060P for
your telephone line
type (tone or pulse).
Contact the other
party and have them
check their fax
machine. You can
also try to send the
document manually.
For an overseas call,
add pauses to the
registered number.
Chapter 13