I Mportant Safety Instructions; F Unction Description Of Circuits; F Unction Of Kill; F Unction Of Locks - Besam ASSA ABLOY Swingmaster 900 Service And Installation Manual

I mportant Safety Instructions

2 B
WARNING – To reduce the risk of severe injury or death, all instruction and installation of safety
equipment must be performed in accordance to ANSI 156.10 for pedestrian usage.

F unction Description of Circuits

3 1 B

F unction of Kill

7 1 B
If the kill circuit is closed on the master or slave control, the control(s) will ignore all signals and
immediately close door(s) at normal speed.

F unction of Locks

7 2 B
The control has an available output of 18 VAC/DC for external locks and lock modules. This output
will require an add on module by others to interface the external lock.

P ush and Go

7 3 B
Initiates the automation of the door by way of the act of "pushing the door". Additional after market
hardware is required.

P ower Failure

7 4 B
After a power failure there is a warm up safety feature of 5 seconds. This allows the time for the
safety system to power up and observe the surrounding conditions.
Besam Entrance Solutions 4 1/31/2008