P Ull Arm System, (Single) - Besam ASSA ABLOY Swingmaster 900 Service And Installation Manual

Surface Mount Installation – Pull

P ull Arm System, (single)

8 4 B
The pull arm system consists of a main arm, guide track, roller guide and shaft adapter. The
maximum reveal, or distance from the wall line to the door leaf (A), should not exceed 5 " (127
mm). All dimensions given here correspond to an opening angle of 90-100° operator with pull arm
on a right-handed door shown (left-handed door mirror image).
Note: If installing on a door with swing clear hinges be
sure to maintain a maximum distance of 3 ¾" (95.25mm)
from centerline of spindle to centerline of pivot.
(1) Clearance holes for 1/4" (6 mm) bolts
and cable inlet are predrilled (field
installation requirements will dictate what
type and size hardware to attach SM
header to wall.
(2) Offset pivot or butt hinge
(3) Adjust during installation
(4) Main Arm
Besam Entrance Solutions
(5) Guide Track
(6) Roller Guide
(7) Outer side of 90° open door
Drive shaft center line
30
Max
dimension
1/31/2008