S Urface Applied Double Pull - Besam ASSA ABLOY Swingmaster 900 Service And Installation Manual

Pulling Arm System, PAS (Double)

S urface applied double pull

8 5 B
Note: If installing on a door with swing clear
hinges be sure to maintain a maximum
distance of 3 ¾" (mm) from center line to
center line of pivot.
(1) Clearance holes for 1/4" (6
mm) bolts and cable inlet are
predrilled (field installation
requirements will dictate what
type and size hardware to
attach SM header to wall.
(2) Offset pivot or butt hinge
(3) Adjust during installation
(4) Main Arm
(5) Guide Track
Besam Entrance Solutions
PIC0075
(6) Roller Guide
(7) Outer side of 90°
Drive shaft Drive Shaft center line
31
Max Dim
1 9/16"
1/31/2008