T Erminal Descriptions - Besam ASSA ABLOY Swingmaster 900 Service And Installation Manual

T erminal Descriptions

8 9 B
TB1: 8 HNO
N.O. at
home
TB1: 9 HNC
N.C. at
home
TB1: 10 IHB
Inhibit
TB2: 11 (+)18
VDC
TB2: 12 0VDC
TB2: 13 Kill
TB2: 14 0VDC
TB2: 15 0VDC
TB2: 16 DONT
USE
TB2: Trans-
17,18 former
TB2: Trans-
19,20 former
Besam Entrance Solutions
Output Utilizes the unused/HOME microswitch on top of SM operator for door
(Switching closed position. (The output is open when the door is closed, once the
common) door is activated and microswitch is tripped, TB1-8 becomes 0VDC.)
Output Utilizes the unused/HOME microswitch on top of SM operator for door
(Switching closed position. (The output is OVDC when the door is closed, once
common) the door is activated and the microswitch is tripped, TB1-9 goes open.)
Output Used for sensor systems requiring voltage to switch them ON-OFF, or
Inhibit.
Caution, Output to be used along with TB1: 4, 5, 6, 8 and 9 only.
Output (+) 18VDC to power sensors and accessories
Common 0VDC = Common
Input Closing a contact to 0VDC will cancel all activation and safety signals
and cause the door to immediately close.
Common 0VDC = Common
Common 0VDC = Common
N/A (For future use, do not use).
Output 18 VAC 75 VA Class 2 output from transformer
Output 18 VAC 75 VA Class 2 output from transformer
41 1/31/2008