S Urface Applied Dual Egress - Besam ASSA ABLOY Swingmaster 900 Service And Installation Manual

Push/Pull Arm System (double egress)

S urface applied dual egress

8 6 B
Note: If installing on a door with swing
clear hinges be sure to maintain a
minimum distance of 3 ¾" (95.25mm)
from a center line of spindle to center
line of pivot.
(1) Clearance holes for 1/4" (6mm)
bolts and cable inlet to be drilled
on site
(2) Offset pivot or butt hinge
(3) Adjust during installation
(4) Outer side of 90°
Besam Entrance Solutions
PIC0074
CL Drive shaft center line
Offset pivot/butt hinge center line
32
Max Dim
1 9/16"
1/31/2008