F Astening Requirements; T Est Equipment; T Ools Required - Besam ASSA ABLOY Swingmaster 900 Service And Installation Manual

F astening Requirements

1 1 B
Base door/wall material
Steel
Aluminum
Reinforced concrete
Wood
Brick wall
*Besam minimum recommended requirements. Building codes may give different specifications.
** Thinner wall profiles must be reinforced with Riv-Nuts.

T est Equipment

1 2 B
•
Stopwatch
•
Force gauge 50 lb (22.7 kg) force range)
•
Multimeter

T ools Required

1 3 B
•
Set of box end wrenches
•
Spirit Level
•
Tape rule
•
Power drill and set of drill bits
•
Metric (MM) and Standard (SAE) Allen head
•
Center punch
•
#2 & #3 Phillips screwdriver
•
Flat blade screwdriver (small/medium/large)
•
Wire stripper
•
Pencil
•
Torque wrench /w/ metric Allen sockets
•
Additional mounting hardware (not supplied – see recommendations above)
•
Silicone sealant
•
Plumb bob
•
US23-0583-09 SwingMaster 900 Service and Installation Manual
Besam Entrance Solutions
Minimum anchor / bolt requirement *
3/16" (20.63 mm) **
¼" (6.35 mm)**
Min. 2" (50.8 mm) from the underside
2" (50.8 mm)
Expansion-shell bolt, min. ¼" x 3 ½" (6.35 x 88.9
mm), min. 2" (50.8 mm) from the underside
16 1/31/2008