When "Ftp Server Address" Is Selected - Konica Minolta PCL-400 User Manual

When "FTP Server Address" is selected:

Item Description
Destination Name Type in the name of the recipient. The display name appears in the control panel
display.
FTP Server Address Specify the IP address or the host name of the FTP site where the scan data will be
sent. (maximum 64 characters)
Directory Specify the directory on the FTP site where the scan data will be saved. (maximum
128 characters)
Use Proxy Select this check box to access the FTP site through a proxy server.
Remote Port Number Specify the port number (1 through 65535) for the remote host when a proxy server
is not used. Normally, port number 21 is used.
E-mail Notification Select this check box to send an e-mail message as notification that the scan data
has been uploaded to the FTP server.
Notification Address Type in the e-mail addresses (up to 10) of the recipients for e-mail notification.
(maximum 64 characters)
Anonymous Select this setting when the FTP site of the recipient is an anonymous FTP server.
Private Site Select this setting when the FTP site of the recipient requires user authentication,
and then specify the following.
User Name: Specify the user name for logging on to the FTP site. (maximum 20
characters)
Password: Specify the password for the user name for logging on to the FTP site.
(maximum 20 characters)
Confirm: Type in the same password again for confirmation.
11-57