Table of Contents
Advertisement
Specifying the SMTP server address
1
In the "E-MAIL SETTING 1" menu, press the [,] or [+] key until "SMTP
SERVER ADDR." is selected, and then press the [OK] key.
2
Type in the IP address or host name for the SMTP server. Press the [OK] key.
–
The host name can contain a maximum of 64 characters.
–
To specify a host name for the SMTP server, the DNS setting must be spec-
ified.
–
For the IP address or host name of the SMTP server, consult with the net-
work administrator.
3
Press the [OK] key.
After the message "ACCEPTED" appears, the "E-MAIL SETTING 1" menu
appears again.
Note
If a number was incorrectly entered, press the [Clear/Stop] key to erase the
number, and then type it in correctly.
7-23
Advertisement
Table of Contents
Troubleshooting
