Konica Minolta PCL-400 User Manual page 193

6
If "MANUAL SETTING" was selected, type in the name of the destination,
and then press the [OK] key.
7
Type in the e-mail address of the recipient.
– "OTHER SETTING=," appears only if fax kit FAX-4000 is installed, the
transmission size and resolution for sending Internet faxes can be specified.
These settings are applied when a transmission is specified using the pro-
cedure for Internet fax transmissions. The settings are not applied when a
transmission is specified using the procedure for Scan to E-mail transmis-
sions. For details on the Scan to E-mail operation, refer to "Performing a
Scan to E-mail operation" on page 9-1.
For details on Internet faxing, refer to the User's Guide for fax kit FAX-
4000.
8
Press the [OK] key.
After the message "REGISTERED" appears, the "DIAL REGISTRATION"
menu appears again.
9
To perform an LDAP search, select "LDAP SEARCH" in the "SPEED DIAL"
menu, and then press the [OK] key.
8-10