Connecting The Ipp Printing Netware Server And This Machine - Konica Minolta PCL-400 User Manual

Connecting the IPP printing NetWare server and this machine

Connecting the NetWare server and this machine
NetWare version
NetWare 4.x
NetWare 5.x / 6
Specifying the NetWare 4.x/5.x/6 print server mode settings
1
Log on with Administrator privileges.
2
Start up NWadmin.
3
Select the print server system or category container, and then select "Print serv-
ice quick setup" from the tool menu.
4
Type in the print server name, printer name, print queue name and volume
name, select "Other/Unknown" as the printer type, and then save the specified
settings.
– For queue user privileges, the printer notification option, assignment of
multiple queues, and passwords, refer to the NetWare documentation, and
specify settings as necessary.
5
Start up Easy Web Management, click the Network tab in Administrator mode,
select "NetWare Configuration", and then specify the following settings for
this machine.
– For details on using Easy Web Management, refer to "Using Easy Web
Management" on page 11-1.
6
From the NetWare Server console, load MONITOR.NLM.
7
Select the connection settings, and check that the PServer you created is listed
in the active connections section.
Parameter
NetWare Configuration*
Frame Type*
Print Server Name
NDS Context Name
Print Server Password
Protocol
IPX
IPX
TCP/IP
NDS
Enable NetWare (Select the check box to enable it.)
AutoDetect (Select the frame type according to the network environ-
ment.)
Print server name created in step 4
Name of the context that connects
to PServer
Specify only when setting from the NetWare Server.
Emulation
NDS / Bindery
NDS / Bindery
Bindery
Not necessary to specify
Service mode
Pserver / Nprinter
Pserver / Nprinter
NDPS(lpr)
3-21