Table of Contents
Advertisement
Item
E-Mail Address
Port Number
SMTP Server Time-
out
Text Insert
Basic Mode/Ad-
vanced Mode
Max. TX Size
Max. Resolution
Coding Mode
POP3 Server Ad-
dress
Account Name
Password
Auto Reception
INTERVAL
Reply Address
Port Number
POP3 Server Time-
out
Header Print
11-72
Description
Specify the e-mail address of the sender. (maximum 64 characters)
Specify the port number (between 1 and 65535) of the SMTP server. Normally,
port number 25 is used.
Specify the amount of time until communication with the SMTP server times out
(between 30 and 300 seconds).
Select to insert the body text of the e-mail message.
Select the e-mail mode (basic mode or advanced mode) to be used for sending doc-
uments as Internet faxes.
Specify the maximum size for transmissions with advanced mode.
Specify the maximum resolution for transmissions with advanced mode.
Specify the maximum compression encoding method for scan data to be sent with
advanced mode.
Specify the IP address or host name for the POP3 server. (maximum 64 characters)
Specify the account name used to log on to the POP3 server. (maximum 64 char-
acters)
Specify the password used to log on to the POP3 server. (maximum 32 characters)
Select whether or not the Auto Reception function is used.
Specify the time interval (between 1 and 60 minutes) for checking for new e-mail
messages during automatic reception.
Specify the e-mail address where a reply is sent to error messages. If an error oc-
curs, a reply to the error message is sent to the e-mail address specified here. Nor-
mally, the e-mail address of the administrator is specified. (maximum 64
characters)
Specify the port number (between 1 and 65535) of the POP3 server. Normally, port
number 110 is used.
Specify the amount of time (between 30 and 300 seconds) until the connection with
the POP3 server times out.
Select whether or not the header (title or sender) is printed.
Advertisement
Table of Contents
Troubleshooting
