–
The destination can be specified using any of the following procedures.
Refer to "Specifying a one-touch dial destination" on page 9-33. (One-
touch dial destinations are available only when optional fax kit FAX-4000
is installed.)
Refer to "Specifying a speed dial destination" on page 9-35.
Refer to "Selecting a destination from the phone book" on page 9-39.
–
Up to 64 characters can be entered.
4
Press the [Start] key.
The "BOOK SCAN" menu appears.
5
Press the [,] or [+] key until "AUTO DETECTION" is selected, and then
press the [OK] key.
–
The remainder of the procedure differs depending on whether "AUTO DE-
TECTION" or "MANUAL" was selected.
9-6