Table of Contents
Advertisement
Installing using Plug and Play on Windows Me
Note
If the driver is installed using Plug and Play, first the TWAIN driver for scanning
is installed, next the USB printing support driver is installed, and then installa-
tion of the printer driver begins. The procedure described in this manual is for
the installation of the TWAIN driver, the USB printing support driver, then the
printer driver. For details on the TWAIN driver, refer to the User's Guide for the
TWAIN driver.
Follow the instructions that appear in the Add New Hardware Wizard to complete the
installation.
1
Select "Specify the location of the driver (Advanced)" and then click the [Next]
button.
2
Select "Specify a location" and then specify the following folder on the CD-
ROM as the location where the driver is saved.
–
Folder to be specified: \DrvPack\Win98_ME\English
–
The folder can be selected after clicking the [Browse] button.
3
Click the [Next] button.
4
Check the location of the driver, and then click the [Next] button.
A dialog box appears, indicating that the installation is finished.
5
Click the [Finish] button.
This completes the installation of the TWAIN driver.
The Add New Hardware Wizard appears again, and the installation of the USB
printing support driver begins.
6
Repeat steps 1 through 5 to install the USB printing support driver.
This completes the installation of the USB printing support driver.
The Add New Hardware Wizard appears again, and the installation of the print-
er driver begins.
7
Repeat steps 1 through 4 to install the printer driver.
A dialog box appears, allowing you to specify the printer name.
2-13
Advertisement
Table of Contents
Troubleshooting
