4
4.4.2
User Authentication
Configure settings to restrict users who use this machine.
When the MFP authentication is selected
When the MFP authentication is selected, do the following.
-
Configure the settings required for the MFP authentication
-
Register the E-mail address of each user when registering users
For details on the settings for the MFP authentication and user registration, refer to page 7-3.
When the Active Directory authentication is selected
When the Active Directory authentication is selected, do the following.
-
Configure the settings required for the Active Directory authentication
-
Register the E-mail address of each of the users from this machine with the server to enable this ma-
chine to obtain the address using the LDAP protocol
For details on Active Directory authentication settings, refer to page 7-12.
When the NTLM or NDS authentication is selected
When the NTLM or NDS authentication is selected, do the following.
-
Configure the settings required for the NTLM or NDS authentication
-
Register the E-mail address of each user in User Registration
For details on NTLM authentication settings, refer to page 7-17.
For details on NDS over IPX/SPX authentication settings, refer to page 7-21.
For details on NDS over TCP/IP authentication settings, refer to page 7-24.
4.4.3
Scan to E-Mail
Configure settings to send an E-mail.
For details, refer to page 4-10.
4.4.4
SMTP over SSL/Start TLS
Configure the settings for SMTP over SSL or Start TLS.
For details, refer to page 4-12.
4.4.5
SMTP Authentication
Configure SMTP authentication settings.
For details, refer to page 4-14.
4.4.6
POP before SMTP
Configure the settings for POP before SMTP.
For details, refer to page 4-14.
4.4.7
POP over SSL
Configure the settings for POP over SSL.
For details, refer to page 4-16.
4-20
Sending scanned data to the user's E-mail address (Scan to Me)
bizhub C360/C280/C220 (Version 4)
4.4