When "Ftp Server Address" Is Selected - Konica Minolta IC-206 User Manual

12

When "FTP Server Address" is selected

Item
Destination Name
FTP Server Ad-
dress
Directory
Use Proxy
Remote Port
Number
E-mail Notification
Notification Ad-
dress
Anonymous
Private Site
12-62
Description
Type in the name of the recipient. The display name appears in the control
panel display.
Specify the IP address or the host name of the FTP site where the scan
data will be sent. (maximum 64 characters)
Specify the directory on the FTP site where the scan data will be saved.
(maximum 128 characters)
Select this check box to access the FTP site through a proxy server.
Specify the port number (1 through 65535) for the remote host when a
proxy server is not used. Normally, port number 21 is used.
Select this check box to send an e-mail message as notification that the
scan data has been uploaded to the FTP server.
Type in the e-mail addresses (up to 10) of the recipients for e-mail notifi-
cation. (maximum 64 characters)
Select this setting when the FTP site of the recipient is an anonymous FTP
server.
Select this setting when the FTP site of the recipient requires user authen-
tication, and then specify the following.
User Name: Specify the user name for logging on to the FTP site. (maxi-
mum 20 characters)
Password: Specify the password for the user name for logging on to the
FTP site. (maximum 20 characters)
Confirm: Type in the same password again for confirmation.
Using PageScope Web Connection
IC-206