Table of Contents
Advertisement
9
Using the keypad, type in the gateway.
–
For the gateway, consult with the network administrator.
–
If the number was incorrectly entered, press the [Clear/Stop] key to erase
it, and then type it in correctly.
10
Press the [OK] key.
The message "ACCEPTED" appears, and then the "NETWORK SETTING"
menu appears again.
11
Press the [Reset] key in the control panel.
–
After the screen shown below appears, turn the machine off, then on again
to restart it.
–
In order to apply the new settings, the machine must be turned off, then on
again to be restarted.
3-12
Advertisement
Table of Contents
Troubleshooting
