User Authentication; When The Mfp Authentication Is Selected; When The Active Directory Or Ldap Authentication Is Selected; When The Ntlm Or Nds Authentication Is Selected - Konica Minolta bizhub c280 User Manual

4
4.4.2

User Authentication

Configure settings to restrict users who use this machine.

When the MFP authentication is selected

When the MFP authentication is selected, do the following.
- Configure the settings required for the MFP authentication
- Register the E-mail address of each user when registering users
For details on the settings for the MFP authentication and user registration, refer to page 7-3.

When the Active Directory or LDAP authentication is selected

When the Active Directory or LDAP authentication is selected, do the following.
- Configure the settings required for the Active Directory or LDAP authentication
- Register the E-mail address of each of the users from this machine with the server to enable this ma-
chine to obtain the address using the LDAP protocol
For details on Active Directory authentication settings, refer to page 7-10.
For details on LDAP authentication settings, refer to page 7-25.

When the NTLM or NDS authentication is selected

When the NTLM or NDS authentication is selected, do the following.
- Configure the settings required for the NTLM or NDS authentication
- Register the E-mail address of each user in User Registration
For details on NTLM authentication settings, refer to page 7-15.
For details on NDS over IPX/SPX authentication settings, refer to page 7-19.
For details on NDS over TCP/IP authentication settings, refer to page 7-22.
4.4.3

Scan to E-Mail

Configure settings to send an E-mail.
For details, refer to page 4-10.
4.4.4

SMTP over SSL/Start TLS

Configure the settings for SMTP over SSL or Start TLS.
For details, refer to page 4-12.
4.4.5

SMTP Authentication

Configure SMTP authentication settings.
For details, refer to page 4-14.
4.4.6

POP before SMTP

Configure the settings for POP before SMTP.
For details, refer to page 4-14.
4.4.7

POP over SSL

Configure the settings for POP over SSL.
For details, refer to page 4-16.
4-20
Sending scanned data to the user's E-mail address (Scan to Me) 4.4
bizhub C360/C280/C220