2
Type in the attribute.
–
The attribute can contain a maximum of 32 characters.
–
For the attribute, consult with the network administrator.
–
If the setting was incorrectly entered, press the [Clear/Stop] key to erase it,
and then type it in correctly.
3
Press the [OK] key.
After the message "ACCEPTED" appears, the "LDAP SETTING" menu ap-
pears again.
Selecting the search method
1
In the "LDAP SETTING" menu, press the [+] or [,] key until "SEARCH
METHOD" is selected, and then press the [OK] key.
2
Press the [+] or [,] key until "BEGIN", "CONTAIN" or "END" is selected,
and then press the [OK] key.
–
Whether "BEGIN", "CONTAIN" or "END" is selected, the message "AC-
CEPTED" appears, and then the "LDAP SETTING" menu appears again.
7-40