When [Fax] Is Selected; When [E-Mail] Or [Ldap Search] Is Selected; When [Ftp] Is Selected - Konica Minolta bizhub 215 User Manual

4.3 Administrator mode
5
Enter necessary items, then click [Apply].
% Necessary items vary depending on the transmission method.
6
In the confirmation dialog box, click [Yes].
Tips
- Clicking a registered speed dial number can check or change the details.

When [Fax] is selected:

Tips
- You can select [Fax] only for models in which the Fax kit FK-510 is installed.
Item
[Destination Name]
[Destination Number]
[F-CODE - SUB address]
[F-CODE - Password]
[Transmission Speed]

When [E-mail] or [LDAP Search] is selected:

Item
[Destination Name]
[Destination Address]
[Basic Mode/Advaced Mode]
[Max TX Size]
[Max Resolution]
[Coding Mode]
Tips
- The item with "*1" is available only for models in which the FAX Kit FK-510 is installed.
- The setting of the item with "
cedure of Internet fax. The setting is not enabled if the data is sent according to the transmission pro-
cedure of Scan to E-mail. For details on the Internet fax, refer to [User's Guide Fax Operations].

When [FTP] is selected:

Item
[Destination Name]
[FTP Server Address]
[Directory]
[Use Proxy]
bizhub 215
Description
Enter a destination name (using up to 20 single-byte characters).
This is the name to be displayed on the Control Panel.
Enter a destination fax number (using up to 30 single-byte charac-
ters).
Enter an F code SUB address (using up to 20 single-byte charac-
ters).
Enter an F code password (using up to 20 single-byte characters).
Select a transmission speed.
Description
Enter a destination name (using up to 20 single-byte characters).
This is the name to be displayed on the Control Panel. If the ad-
dress is selected using [LDAP Search], the item is already entered.
Enter the E-mail address of the destination (using up to 64 single-
byte characters). If the address is selected using [LDAP Search],
the item is already entered.
*
1 Specify the mail mode (basic mode, advaced mode) used for send-
ing an Internet fax.
*
1 Specify the upper limit of transmission size for sending in the ad-
vaced mode.
*
1 Specify the upper limit of transmission image quality for sending in
the advaced mode.
*
1 Specify the upper limit of compression coding system for sending
scan data in the advaced mode.
*
1" is available only if the data is sent according to the transmission pro-
Description
Enter a destination name (using up to 20 single-byte characters).
This is the name to be displayed on the Control Panel.
Specify the host name or IP address of the FTP site to send scan
data (using up to 64 single-byte characters).
Specify the directory of the FTP site to save scan data (using up to
128 single-byte characters).
Select this check box to access the FTP site via the proxy server.
4
4-27