Procedures For Making Connections And Installing The Driver - Konica Minolta PCL-400 User Manual

Connecting to the network
In the following procedure, the machine is connected directly to the computer by us-
ing a network cable.
When the machine is connected to a network, use the AutoRun Installation to install
the printer driver. For the procedure on installing the printer driver when this machine
is connected to a network, refer to "Installing the printer driver by using the AutoRun
Installation" on page 2-15.

Procedures for making connections and installing the driver

The printer driver can be installed by using Plug and Play or by using the AutoRun
Installation.
The installation procedure differs depending on the method used to make the connec-
tion. Use the installation method that corresponds with the connection method.
Reminder
If the machine is to be connected to a USB port, install the driver by using Plug
and Play. If the machine is to be connected to a network, install the driver by us-
ing the AutoRun Installation.
2-3