5
Press the [OK] key.
After the message "SEARCHING" appears, the search results screen appears.
–
If a destination could not be found with the entered name, the message
"NOT FOUND" appears, and then the screen shown in step 4 appears.
6
Select the destination, and then press the [OK] key.
The destination appears in the Scan mode screen.
–
When the destination address is entered, "OTHER SETTING=," appears.
To change transmission settings, such as the subject, cc address or image
format, press the [,] key. The "SCAN OTHER SETTING" menu appears.
For details on changing the transmission settings, refer to "Changing the
transmission settings" on page 9-10.
7
Press the [Start] key.
9-43