Advanced Diagnosis; Version & S/N - Delta DPS Series User Manual

Item
Clear Battery
Test Result
Clear Kilowatt
Hour (kWh)
NOTE:
The records mentioned above are important information for system analysis and
maintenance. Do not clear any of them without the consent of qualified service
personnel.
7.7.6

Advanced Diagnosis

Path: → Advanced Diagnosis
This is an optional function. If you would like to access this page, please contact Delta
customer service.
7.7.7 Version & S/N
NOTE:
To operate the UPSs in parallel, please make sure all the versions below are the
same for each parallel unit.
Path: → Version & S/N
Item Sub Item
S/N System
Parallel Communication
Card #_ MCU/ FPGA
System Control Card_
MAIN
MCU/ FPGA
Touch Panel _ MCU
PM #_
INV
MCU/ MCU2/ FPGA
PFC PM #_ MCU/ MCU2
Ultron DPS Series
After you select 'Clear' and confirm clearance of battery test result,
the battery test result will be cleared.
After you select 'Clear' and confirm clearance of kilowatt hour
records, the kilowatt hour statistics will be cleared.
Check the system's serial No.
Check and update the MCU or FPGA firmware
version of a specific parallel communication card.
Check and update the MCU or FPGA firmware
version of the system control card.
Check and update the touch panel's MCU firmware
version.
Check and update the MCU, MCU2 or FPGA
firmware version of a specific power module's
inverter.
Check and update the MCU or MCU2 firmware
version of a specific power module's PFC.
Description
Description
122