Assembling the MultiPASS
Follow this procedure to assemble the MultiPASS:
n
To see how the MultiPASS will look fully assembled, 1 Main Components of the
MultiPASS , p. 2-9.
1
Hold the document
support so that it
curves toward the
back of the unit and
fit the tabs of the
support into the
slots above the ADF.
Chapter 2
2
The MultiPASS comes
with the document
tray already attached.
However, if you
accidentally remove
the tray, attach it by
fitting the slots on the
tray into the tabs on
the unit.
Setting Up
2-5