Printing On Fabric Sheets - Canon MultiPASS C555 User Manual

Printing on Fabric Sheets

Canon Fabric Sheet FS-101 comes with a booklet that describes special handling
procedures. Be sure to read this booklet for special information on fabric sheets.
n
• Do not use the fixing agent provided with the Canon Fabric Sheet FS-101. This agent is
not necessary when printing with the MultiPASS.
• Do not touch newly printed fabric sheets until the ink has dried completely. This takes
about an hour.
Follow this procedure to load a fabric sheet in the multi-purpose tray:
1
Make sure the paper thickness lever is
e
set to
• For details, (1 p. 5-6).
c
Do not set the paper thickness lever
while the MultiPASS is printing since
this will cause problems.
2
With the cloth side toward you and
the open end at the top, insert one
fabric sheet into the multi-purpose
tray until it stops q, so that the right
edge of the sheet is aligned with the
right side of the multi-purpose tray.
Slide the paper guide snugly against
the left edge of the sheet w.
3
Your MultiPASS is now ready to print.
Set your PC to print on the fabric
sheet.
4
When the fabric sheet is printed, let it
dry for about an hour to allow the ink
to dry completely.
5
When dry, peel the film backing from
the printed fabric sheet.
Chapter 5
(right).
C
a I n
B
r t k
C r i
B
d
l - g
l a 2
e
M c 1
a k
J d
a e
p
a in
n
OPEN END AT
THE TOP
2
Paper Handling
1
5-13