Cleaning The Scanner Components - Canon MultiPASS C555 User Manual

Cleaning the Scanner Components

Follow this procedure to periodically check and clean the scanner components:
1
Disconnect the power cord from the
MultiPASS.
2
Open the document tray.
3
Open the operation panel partially by
gently pulling it toward you.
• It only opens slightly.
4
While holding the operation panel
open, clean these components:
• Separation guide and separation roller
Wipe with a clean, soft, dry, lint-free cloth.
• White sheet and scanning glass
Wipe with a clean, soft, lint-free cloth
moistened with water, then wipe with a
clean, soft, dry, lint-free cloth.
n
•
If the scanner components are dirty,
the documents you send or copy will
also be dirty.
• Be sure to use a soft cloth to avoid
scratching the components.
c
Do not use tissue paper, paper
towels, or similar materials for
cleaning; they can stick to the
components or generate static
charges.
Chapter 12
SEPARATION GUIDE
SEPARATION ROLLER
WHITE SHEET
SCANNING GLASS
12-5
Maintenance