Assembling the MultiPASS C50
Use the following instructions to assemble your MultiPASS C50 main
unit and components. To see how the MultiPASS C50 will look fully
assembled, see "Getting Acquainted With Your MultiPASS C50" on
page 2-20.
Attaching Components
Attaching the Sending Document Support
The sending document support holds documents as they feed into the
Automatic Document Feeder (ADF).
To install this support, insert one of its tabs into the corresponding slot
above the MultiPASS C50's Automatic Document Feeder (ADF), then —
firmly but gently — insert the other.
Chapter 2
Setting Up Your MultiPASS C50
2-11