Canon MultiPASS C555 User Manual page 76

7
Use the numeric buttons to enter the fax/
telephone number you want to register (max.
120 digits, including spaces and pauses).
• To enter a space, press Space. Spaces are
optional and are ignored during dialing.
• To enter a pause, press Redial/Pause.
• To correct a mistake in the number, press l to
delete the rightmost digit.
• To delete an entire entry or to change a
previous entry, press Clear.
• If you have already registered a number and
you only want to change the name, ignore this
step.
• To cancel one-touch speed dialing for the
button you selected, press Clear then Set.
Press Stop to return to standby mode. The
fax/telephone number and name registered
under that button will be deleted.
Set
8
Press
9
Use the numeric buttons to enter the name
that goes with the number (max. 16
characters, including spaces).
• If you are unsure how to enter characters,
(1 p. 3-3).
• If you have already registered a name and
want to keep the same name, ignore this step.
Set
10
Press
11
To continue registering other one-touch
speed dialing buttons, repeat the procedure
from step 5.
-or- Stop
Press
n
You can print the 1-Touch Spd Dial List showing all the numbers and names registered for
one-touch speed dialing (1 p. 6-13). Keep this list near your MultiPASS so you can refer
to it easily when dialing.
6-4
Speed Dialing
twice.
.
to return to standby mode.
Ex:
TEL=20 545 8545_
DATA ENTRY OK
NAME
_
Ex:
Canon EUROPA
DATA ENTRY OK
Ex:
05=
Ex:
12/27 FaxTel
:A
:A
Chapter 6