Table of Contents
Advertisement
Document Requirements
The documents you load into the ADF for sending, copying, and scanning must meet
the requirements shown in the table below.
Depending on your document, select automatic or manual document feed with the
document feed lever located at the top of the operation panel.
Type of
document
Size
(W
L)
Quantity
Thickness
Weight
Problem Documents
• To prevent document jams in the ADF, do not use any of the following:
– Wrinkled or creased paper
– Curled or rolled paper
– Torn paper
• Remove all staples, paper clips, or any other fasteners before loading the document
into the ADF.
• Make sure any glue, ink, or correction fluid on the paper is completely dry before
loading the document into the ADF.
• If you have a document that will not feed properly into the ADF, make a photocopy of
the document and load the copy instead.
* 20 lb. (75 g/m
4-2
Document Handling
a (Automatic Document Feed)
Multipage documents of the same
thickness and weight.
Max. 8.5
Approx. 39 in.
(Max. 216 mm
Approx. 1 m)
Min. 8.27
5.83 in.
(Min. 210
148 mm)
Max. 20 letter- or A4-size sheets*
Max. 10 legal-size sheets*
1 sheet for sizes other than these.
0.003 to 0.005 in.
(0.08 to 0.13 mm)
20 to 24 lb. (75 to 90 g/m
2
) paper
m (Manual Document Feed)
• Thick paper
• Documents with uneven surfaces
• Photographs
• Small documents (e.g. business
cards, postcards)
• Special types of paper
(Use of a carrier sheet is
recommended to avoid scratching
the surface of documents)
Max. 8.5
(Max. 216 mm
Min. 3.15
(Min. 80
1 sheet
0.003 to 0.017 in.
(0.08 to 0.43 mm)
2
)
24 to 90.7 lb. (90 to 340 g/m
– Carbon paper or carbon-backed paper
– Coated paper
– Onion skin or thin paper
Approx. 39 in.
Approx. 1 m)
1.77 in.
45 mm)
2
)
Chapter 4
Hide quick links:
Advertisement
Table of Contents
