Canon MultiPASS C555 User Manual page 89

For black & white sending, set the resolution as follows:
1
Make sure the light above
• If not, press Color/B&W to turn it off.
Image Quality
2
Press
setting you want.
• You can select from the following:
– FAX STANDARD
Suitable for most text-only documents.
– FAX FINE
Suitable for fine-print documents.
– FAX PHOTO
Suitable for documents that contain images
such as photos. With this setting, areas of
the document that contain photos are
automatically scanned with 64 levels of gray,
rather than just two (black & white). This
gives a much better reproduction of photos,
though the transmission time is longer.
After about 10 seconds, the LCD returns to standby mode.
For color sending, set the resolution as follows:
Color
1
Press
Image Quality
2
Press
setting you want.
• You can select from the following:
– FAX STANDARD
Provides standard color resolution.
– FAX FINE
Provides a higher quality color resolution.
After about 10 seconds, the LCD returns to standby mode.
n
You can change the resolution setting while the document is being scanned for sending.
However, please note that your new setting will only be effective from the next page
scanned.
Chapter 7
Color / B&W
to select the resolution
/ B&W
to turn on its light.
to select the resolution
is turned off.
Ex:
FAX PHOTO
Ex:
FAX FINE
Sending Faxes
7-3