Table of Contents
Advertisement
Choosing a Location for the MultiPASS
Before unpacking your MultiPASS, read the guidelines in Important Safety Instructions
(1 p. 1-7) to make sure you choose a location best suited for the MultiPASS.
Dimensions
Make sure the location you choose provides enough space around the MultiPASS for
adequate ventilation, and to allow paper to flow freely into and out of the unit. Install the
MultiPASS approximately 4 inches (10 cm) away from walls and other equipment. For
the dimensions of the MultiPASS, (1 p. A-2).
Unpacking the MultiPASS
Follow the directions below to unpack the MultiPASS properly, and to make sure you
have all its components and documentation.
n
When lifting the MultiPASS out of the box, or when you need to move it, lift it from the
bottom and hold it firmly and level.
Do You Have Everything?
As you unpack the MultiPASS, save the carton and packing material in case you want
to move or ship the unit in the future.
Carefully remove all items from the box. You should have someone help by holding the
box while you lift the MultiPASS and its protective packaging out of the box.
Make sure you have the following documentation as well as the items shown on the
next page:
• QUICK START GUIDE
• STAND-ALONE FAX MANUAL
• CANON CREATIVE CD for MultiPASS C555
• LIMITED WARRANTY CARD
The following items are in MultiPASS SUITE SOFTWARE/PRINTER DRIVER CD-ROM:
• MultiPASS C555 USER'S GUIDE (This guide)
• MultiPASS SUITE FOR WINDOWS SOFTWARE USER'S GUIDE
2-2
Setting Up
Chapter 2
Hide quick links:
Advertisement
Table of Contents
