Loading Paper; Paper Guidelines - Canon MultiPASS C555 User Manual

Loading Paper

This section describes how to load plain paper in the multi-purpose tray so that you can
begin using your MultiPASS.
For complete details on the different print media you can use and instructions for
selecting and loading other print media, (1 Chapter 5, Paper Handling) .

Paper Guidelines

• Store all print media wrapped and on a flat surface until ready to use. Keep opened
packs in their original packaging, in a cool, dry location.
• Store paper at 64.4°–75.2°F (18°–24°C), 40%–60% relative humidity.
• To avoid paper jams and poor print quality, do not print on damp, curled, wrinkled, or
torn paper.
• Use cut-sheet paper only, not paper that comes on a roll.
• Do not use paper thicker than can be used for the MultiPASS (1 p. 5-2). Thick paper
can come into contact with the print head nozzles and cause damage to the BJ
cartridge.
• Do not load paper beyond the paper limit mark (P) or beyond the tab on the multi-
purpose tray. Doing so may cause paper feeding or printing problems. Also, make
sure there are no gaps on either side of the paper stack.
PAPER LIMIT MARK
• If the print media has a print side, set it in the multi-purpose tray with the print side
facing upward.
• The capacity of the output tray is 50 sheets of paper. To prevent paper jams, remove
paper from the output tray before the count reaches 50.
• Let the paper run out before refilling the multi-purpose tray. Avoid mixing "new" paper
with paper already loaded.
Chapter 2
NO GAP HERE
TAB
Setting Up
2-17