Canon MultiPASS C555 User Manual page 79

9
Use the numeric buttons to enter the fax/
telephone number you want to register (max.
120 digits, including spaces and pauses).
• To enter a space, press Space. Spaces are
optional and are ignored during dialing.
• To enter a pause, press Redial/Pause.
• To correct a mistake in the number, press l to
delete the rightmost digit.
• To delete an entire entry or to change a
previous entry, press Clear.
• If you have already registered a number and
you only want to change the name, ignore this
step.
• To cancel coded speed dialing for the code
you selected, press Clear then Set. Press
Stop to return to standby mode. The
fax/telephone number and the name
registered under that code will be deleted.
Set
10
Press
11
Use the numeric buttons to enter the name
that goes with the number (max. 16
characters, including spaces).
• If you are unsure how to enter characters,
(1 p. 3-3).
• If you have already registered a name and
want to keep the same name, ignore this step.
Set
12
Press
13
To continue registering other coded speed
dialing codes, repeat the procedure from
step 7.
Stop
-or-
Press
n
You can print the Coded Speed Dial List showing all the numbers and names registered for
coded speed dialing (1 p. 6-13). Keep this list near your MultiPASS so you can refer to it
when dialing.
Chapter 6
twice.
.
to return to standby mode.
Ex:
TEL=3 3758 2111_
DATA ENTRY OK
NAME
_
Ex:
Canon Inc.
DATA ENTRY OK
Ex:
A02=
Ex:
12/27 FaxTel
Speed Dialing
:A
:A
6-7